2023 Schulte TPX-318 Base

Information

2023 Schulte TPX-318

Features may include:

  • 18.5 feet wide, with fixed knives and shrouding for optimum shredding performance and distribution when doing residue management in row crops like corn, cotton and sugar cane
  • Adjustable wheel standards for shredding in virtually all row crop spacings
  • Four position adjustable 3pt to keep cutter as close to the tractor as possible
  • Heavy duty rubber coupler on drive line for protection in harsh conditions
  • Fold up design for narrow transport width
  • Greasable bushings everywhere for longer life
  • Timed blades (without blade to blade contact) allow for a compact front to back length
  • Large flotation skid steer tires (10.5” X 27”) to minimize compaction
  • Easy height adjustment on rear tires
  • Double acting wings that can be locked off in rigid position for row crops or flex wing for ground contouring
  • Only one hydraulic circuit needed to operate this unit
  • Wide hinge gap to keep debris from falling on centre deck when folding up wings

Photos

Highlights

  • Dauphin, Manitoba
  • 2023
  • Schulte
  • TPX-318 Base
  • Available
  • Machine: 8.75ft (2,67m) | Cut: 2” - 17” (5-43cm)

Specifications

  • 2023
  • Schulte
  • TPX-318
  • Base
  • General
  • 185 (136kw) (3pt lift capacity dependent)
  • Max: 325 hp (239kw)
  • Splitter box: 210hp (157kw) | Down boxes: 210hp (157kw)
  • Tractor RPM: 1000
  • Center blade tip speed: 16,308 (ft/min) | Wing blade tip speed: 16,308 (ft/min)
  • 1000: Cat 6 with clutch | Cutter shafts: Cat 6 with rubber coupler | 3pt: Cat 2 quick, cat 3, cat 3 quick, cat 4, cat 4 quick
  • deflectors: Single chains standard, rear and front belting option
  • Wing float (when in float position): 11 degrees down & 18 degrees up (lower cylinder mount), 0 degrees down & 20 degrees up (upper mount) | Blade overlap: 3” (7.6cm) | Cut capacity: 3.5” (8.9cm) | Blades: 1/2” x 4” (1.3cm X 10.2cm) | Tires: Skid steer - 10.5 (26.7cm) x 27” (68.6cm)
  • thickness: 10 ga (.34cm)
  • 18.5’ (5.64m)
  • 116.5” (296cm) wing tip to wing tip
  • Machine: 8.75ft (2,67m) | Cut: 2” - 17” (5-43cm)
  • Machine: 12.7 ft (3.87 m)
  • Approximate: 6,300lbs (2858kg)