2023 Schulte XH-1000 Base

Information

2023 Schulte XH-1000

The Schulte XH1500/XH1000 Series 5 Rotary Cutters are the latest version of Schulte's popular heavy duty rotary cutter line.They retain all of the best features of the original XH1500/XH1000 Rotary Cutters, such as tandem walking axles, heavy duty drive line and deck protection rings, while adding many new improvements.

Features may include:

  • Extra heavy duty 275hp dividerbox
  • Increased ground clearance, larger cutting chamber and increased blade tip speeds
  • Internal gearbox mount reinforcement
  • Continuously welded, single domed, sweep-clean deck
  • Adjustable and replaceable side skirt with skid shoes that are cast and cupped to reduce scrubbing on tight turns.
  • Cutting chamber depth of 15 3/8” (2" greater than the Series 4) improves cutting speed and quality
  • Extra large 10.5 X 27 skid steer tires or 26" laminated tires
  • Walking or through axles available on both centre section and wings
  • Rugged hinge line
  • Wing lift tower for easier operation & increased strength
  • Extra heavy duty, 240hp right angle gearboxes with 3” (75mm) down shaft
  • Extra heavy duty Cat 6 cutter deck drive lines with large hi-torque, self-adjusting slip clutches
  • Oil level sight glass

All grease points on the main mower body have been eliminated,spring steel greaseable bushings are used only in the walking axles. All other major pivot points now use maintenance free, fibre wound bushings with 1 1/4"diameter pins for strength.

Photos

Highlights

  • Dauphin, Manitoba
  • 2023
  • Schulte
  • XH-1000 Base
  • Available
  • Cutting: 1.5 to 19.25" (38 to 490mm)

Specifications

  • 2023
  • Schulte
  • XH-1000
  • Base
  • General
  • tractor: 70 HP (52kW)
  • Maximum tractor: 90 HP (67kW)
  • Divider rating: 275 HP (205kW) | Centre/wing rating: 240 HP (179kW)
  • Wing: 1002 rpm, 16,290 ft/min (4965m/min) | Centre: 850 rpm, 16,390 ft/min (4996m/min) | Blade tip speed: 1000 rpm | Blade tip: 540 rpm | Centre: 848 rpm, 16,286 ft/min (4964m/min) | Wing: 986 rpm, 16,030 ft/min (4886m/min)
  • Drive Size centre and wings: Cat 6 | 540 CV: Cat 6 | 1000 CV: Cat 5
  • Wing working range: 25 degrees down to 90 degrees up | Wing float range: 25 degrees down to 45 degrees up | Blade overlap: 6.5" (165mm) | Side band skirt thickness: 1/4” (6.35mm) | Cutting capacity: 5" material (127mm) with brush blade
  • (4.57m)126" (3.20m)
  • 139" (3.53m)
  • 198" (5.03m) | with walking axles: 207" (5.26m)
  • min: 89” (2.26m)
  • 84” (2.13m)
  • Side band skirt: 15 3/8” (.39m)
  • Cutting: 1.5 to 19.25" (38 to 490mm)
  • transport: 18.5" (470mm) (27” tires)
  • Transport hitch , approx: 2100lbs (953kg)
  • with walking axles, approx.: 7360lbs (3338kg)